1000 ton Knuckle Joint Press Barnaul K8340 #434
TypeKnuckle Joint Press
Nominal force1000 ton
LocationEurope
StatusHot offer
Used Industrial Equipment · Poland, Europe
Used Mechanical Presses for Sale
Mechanical presses across all subtypes — knuckle joint, hot forging, trimming, screw and eccentric — from 160 to 2500 ton, sourced from Polish and Central European forging plants and available for worldwide export.
1600 ton Hot Forging Press TMP Voronezh K8542
TypeHot Forging Press
Nominal force1600 ton
LocationEurope
StatusHot offer
1600 ton Knuckle Joint Press Agostino Colombo G1600
TypeKnuckle Joint Press
Nominal force1600 ton
LocationEurope
StatusHot offer
Knuckle Joint Press Kieserling & Albrecht KKPR 2000/1000
TypeKnuckle Joint Press
Nominal force2000 ton
LocationEurope
StatusHot offer
400 ton Knuckle Joint Coining Press Barnaul KB8336
TypeKnuckle Joint Press
Nominal force400 ton
LocationEurope
StatusAvailable
400 ton Hot Forging Press Farina GAS-400
TypeHot Forging Press
Nominal force400 ton
LocationEurope
StatusAvailable
2500 ton Knuckle Joint Press TMP Voronezh KB8044 504.003.844
TypeKnuckle Joint Press
Nominal force2500 ton
LocationEurope
StatusAvailable
250 ton Screw Press STANKO F1734
TypeScrew Press
Nominal force250 ton
LocationEurope
StatusAvailable
250 ton Screw Press Stankoimport F1734A
TypeScrew Press
Nominal force250 ton
LocationEurope
StatusAvailable
250 ton Trimming Press KA2534 #943
TypeTrimming Press
Nominal force250 ton
LocationEurope
StatusAvailable
250 ton Trimming Press Smeral LKT 250
TypeTrimming Press
Nominal force250 ton
LocationEurope
StatusAvailable
400 ton Trimming Press TMP Voronezh KA2536
TypeTrimming Press
Nominal force400 ton
LocationEurope
StatusAvailable
1000 ton Forging Press EUMUCO SP 100
TypeHot Forging Press
Nominal force1000 ton
LocationEurope
StatusSold
1000 ton Hot Forging Press Massey
TypeHot Forging Press
Nominal force1000 ton
LocationEurope
StatusSold
1000 ton Knuckle Joint Press Barnaul K8340 #2
TypeKnuckle Joint Press
Nominal force1000 ton
LocationEurope
StatusSold
1000 ton Knuckle Joint Press Barnaul K8340
TypeKnuckle Joint Press
Nominal force1000 ton
LocationEurope
StatusSold
1300 ton Hot Forging Press Massey
TypeHot Forging Press
Nominal force1300 ton
LocationEurope
StatusSold
1600 ton Knuckle Joint Press Barnaul K8342
TypeKnuckle Joint Press
Nominal force1600 ton
LocationEurope
StatusSold
1600 ton Trimming Press TMP Voronezh K9542
TypeTrimming Press
Nominal force1600 ton
LocationEurope
StatusSold
250 ton Trimming Press KG 9534.01
TypeTrimming Press
Nominal force250 ton
LocationEurope
StatusSold
2500 ton Knuckle Joint Press TMP Voronezh K504.003.844
TypeKnuckle Joint Press
Nominal force2500 ton
LocationEurope
StatusSold
400 ton Eccentric Press ZTS SMERAL LE 400 C
TypeEccentric Press
Nominal force400 ton
LocationEurope
StatusSold
Knuckle Joint Press BARNAUL KB8336 – 400 tons
TypeKnuckle Joint Press
Nominal force400 t
LocationEurope
StatusSold
Trimming press Voronezh K2536 400 ton
TypeTrimming Press
Nominal force400 ton
LocationEurope
StatusSold
600 ton Hot Forging Press Massey
TypeHot Forging Press
Nominal force600 ton
LocationEurope
StatusSold
Types of Used Mechanical Presses Available
Knuckle joint presses (400–2500 ton)
Barnaul, TMP Voronezh, Agostino Colombo and Kieserling & Albrecht machines for cold forging, coining and sizing. High bottom-dead-center force with controlled, slow slide approach — suited to automotive fasteners and bearing rings.
Hot forging presses (500–4000 ton)
Massey, SMS Eumuco, Lasco and TMP Voronezh eccentric-drive presses for open-die and closed-die hot forging. Common in automotive and general engineering production.
Trimming presses (160–1600 ton)
Smeral, TMP Voronezh and Lasco machines for flash removal on forging lines; often stored at the same site as the matching forging press.
Screw and eccentric presses (160–1600 ton)
Stanko friction screw presses, Schuler eccentric presses. Suitable for forming, coining and blanking in short to medium production runs.
Why Source from Poland
Poland holds the largest inventory of Soviet-era and CMEA heavy mechanical presses in Central Europe. Former state forging plants operated these machines for decades; many have low cycle counts relative to their age due to reduced production after 1990. EU location ensures no intra-EU import duties and EUR invoicing for European buyers.
FAQ
Frequently Asked Questions
Knuckle joint presses use a toggle mechanism to amplify force at bottom dead center — used for cold forging, coining and sizing where precision and sustained pressure matter. Hot forging presses use an eccentric or crank drive for high-speed impact forming at elevated temperatures.
Current machines across all subtypes are listed in the grid above. Contact us with your specific press type, tonnage and application and we will advise on availability.
Original Russian-language operation manuals and electrical diagrams are typically available. We can arrange technical translation when source documentation allows it. CE assessment for installation is the buyer's responsibility, together with a qualified safety consultant.
Yes. TRIGA coordinates craning, disassembly to transport dimensions, flatbed or low-loader loading, oversized load permits and export documentation end-to-end.
In many cases yes — forging press, trimming press and handling equipment are often stored at the same site. Contact us with your production requirements and we will advise on available combinations.
Contact Us
Looking for a specific machine?
Send us your specifications and we will advise on availability, inspection options and delivery.
Email
info@trigapl.com
Phone / WhatsApp
+39 331 780 4001
WhatsApp
+48 570 337 352
✓ Response within 24 hours · EN / IT / PL