1000 ton Knuckle Joint Press Barnaul K8340 #434
TypeKnuckle Joint Press
Nominal force1000 ton
LocationEurope
StatusHot offer
Used Knuckle Joint & Coining Presses · Export to Vietnam
Used Knuckle Joint & Coining Presses for Sale in Vietnam
TRIGA sources used knuckle joint and coining presses from European plants and exports them to Vietnamese factories from Poland. Current references include the 400 ton Barnaul KB8336 coining press, 1000 ton Barnaul K8340, 1600 ton Agostino Colombo G1600, 2000 ton Kieserling & Albrecht KKPR 2000/1000, and 2500 ton TMP Voronezh KB8044, with photos, video, specifications, and export paperwork.
Published: 23 Jul 2026
Which Vietnamese Industries Buy Knuckle Joint and Coining Presses?
Coining and calibration of forgings
A knuckle joint press works well for coining, calibration, sizing, and finishing of forged parts after hot forging or pre-forming. The Barnaul KB8336 at 400 ton is built specifically for coining work.
Motorcycle and automotive components
Tier 2 suppliers in Hai Phong, Bac Ninh, and Hai Duong use knuckle joint presses for motorcycle and automotive parts: gear blanks, hubs, and CV joint components that need controlled final forming near bottom dead centre.
Fasteners cold forging
Bolt and nut producers use knuckle joint presses for large fasteners and formed blanks where high force near bottom dead centre improves fill and sizing.
Bearing races and rings
Bearing and ring producers use the short, powerful working stroke for races, sleeves, and rings when the die set needs stiffness and repeatability.
Current Selection
Knuckle Joint & Coining Presses Available for Export to Vietnam
1600 ton Knuckle Joint Press Agostino Colombo G1600
TypeKnuckle Joint Press
Nominal force1600 ton
LocationEurope
StatusHot offer
Knuckle Joint Press Kieserling & Albrecht KKPR 2000/1000
TypeKnuckle Joint Press
Nominal force2000 ton
LocationEurope
StatusHot offer
400 ton Knuckle Joint Coining Press Barnaul KB8336
TypeKnuckle Joint Press
Nominal force400 ton
LocationEurope
StatusAvailable
2500 ton Knuckle Joint Press TMP Voronezh KB8044 504.003.844
TypeKnuckle Joint Press
Nominal force2500 ton
LocationEurope
StatusAvailable
1600 ton Knuckle Joint Press Barnaul K8342
TypeKnuckle Joint Press
Nominal force1600 ton
LocationEurope
StatusSold
2500 ton Knuckle Joint Press TMP Voronezh K504.003.844
TypeKnuckle Joint Press
Nominal force2500 ton
LocationEurope
StatusSold
Knuckle Joint Press BARNAUL KB8336 – 400 tons
TypeKnuckle Joint Press
Nominal force400 t
LocationEurope
StatusSold
Which Specifications Matter for Vietnamese Buyers?
Maximum force near bottom dead centre
The knuckle mechanism builds its highest force close to bottom dead centre. This helps fill closed dies, coin details, and calibrate parts at the end of the stroke.
Available tonnage range
400 to 2500 ton is the current available range: the Barnaul KB8336 coining press at the low end (130 mm stroke), the TMP Voronezh KB8044 at the top (190 mm stroke). This covers fastener sizing through heavy structural coining.
Rigid frame for off-centre load
25,637 kg is the weight of the Barnaul K8340 (1000 × 800 mm table); the Agostino Colombo G1600 carries a 1060 × 900 mm table at 635 mm shut height. Large knuckle joint presses use heavy frames and wide tables to hold this rigidity under off-centre load.
Power supply compatibility
380V three-phase 50Hz is Vietnam's standard industrial supply, the same voltage Soviet-era presses such as the Barnaul and TMP Voronezh machines were originally built for. Confirm motor rating on the nameplate before connecting.
How Do the Available Machines Compare?
| Machine | Force | Stroke | Table size | Shut height | Weight |
|---|---|---|---|---|---|
| Barnaul KB8336 (coining) | 400 ton | 130 mm | 500 × 500 mm | 375 mm | 8,500 kg |
| Barnaul K8340 | 1000 ton | 170 mm | 1000 × 800 mm | 630 mm | 25,637 kg |
| Agostino Colombo G1600 | 1600 ton | 135 mm | 1060 × 900 mm | 635 mm | On request |
| Kieserling & Albrecht KKPR 2000/1000 | 2000 ton | 140 mm | On request | 510 mm | On request |
| TMP Voronezh KB8044 | 2500 ton | 190 mm | 1530 × 1530 mm | 560 mm | 125,000 kg |
FAQ
Frequently Asked Questions
Vietnamese buyers most often use knuckle joint presses for cold forging, coining, sizing, calibration, large fasteners, bearing rings, and motorcycle or automotive components that need high force near bottom dead centre.
A hot forging press usually works with heated billets and longer forming operations. A knuckle joint press develops peak force near bottom dead centre, so it suits cold forging, coining, calibration, and final sizing where the part needs high pressure at the end of the stroke.
"Coining press" describes a knuckle joint press set up for a specific job: striking a final, precise impression into a part, such as a logo, thread form, or exact thickness. The Barnaul KB8336 in our range is built and specified for this use, at 400 ton with a 130 mm stroke. Every coining press is a knuckle joint press; not every knuckle joint press is used for coining.
400 to 1000 ton covers most coining and sizing operations; 1000 to 2500 ton covers larger fasteners and structural parts. Exact tonnage depends on material grade, part diameter, die area, and whether the work is cold or warm formed. Send drawings and material data before selecting a press.
380V 50Hz is Vietnam's standard three-phase industrial supply, matching the original design voltage of Soviet-era presses such as the Barnaul and TMP Voronezh machines. No step-down transformer is needed; confirm the motor rating on the nameplate before connecting.
40 to 55 days is the typical sea freight transit from Gdańsk or Gdynia to Vietnamese ports (Hai Phong, Ho Chi Minh City, Da Nang), depending on routing and transshipment. Add time for dismantling and loading at the machine's location, plus customs clearance at the Vietnamese port.
Yes. We arrange inspection before shipment, including photo and video checks, verification of main specifications, and access for your engineer or an independent inspection company when the seller allows it.
Yes. We quote based on described condition. If the inspection finds defects not mentioned in our listing, this is valid ground for renegotiation. We prefer to discuss openly rather than lose a buyer over a repair item that both sides can factor in.
Full range of used knuckle joint presses from Europe → · All used presses for Vietnam →
Contact Us
Send your knuckle joint press requirements
Tell us the part type, required tonnage, and your location in Vietnam. We will match to available machines and advise on export timeline.
Email
info@trigapl.com
Phone / WhatsApp
+39 331 780 4001
WhatsApp
+48 570 337 352
✓ Response within 24 hours · EN / IT / PL