2000 ton Hydraulic Press Dnepropress D2243
TypeHydraulic Press
Nominal force2000 ton
LocationBalti city, Moldova
StatusSold
Soviet Heavy Press Building · Dnipro, Ukraine
Used Dnepropress Hydraulic Presses
Dnepropress refers to the Dnepropetrovsk press-building plant in today's Dnipro, Ukraine, a Soviet manufacturer of heavy hydraulic and mechanical presses. TRIGA's recent Dnepropress D2243 reference machine, a 2000 ton hydraulic press, has been sold. For current enquiries, TRIGA sources Dnepropress hydraulic presses through a partner network on request, with inspection, dismantling and export logistics planned around each candidate machine.
About Dnepropress Hydraulic Presses
Dnepropress hydraulic presses are associated with heavy forming, drawing, straightening and pressing work. Their value on the used market comes from large daylight, long stroke, heavy table capacity and a hydraulic system that can deliver controlled force through the working stroke.
The TRIGA reference model is the D2243, a 2000 ton hydraulic press with a 1400 mm slide stroke, 1650 x 2000 mm table and 144.5 ton machine weight. This size class suits heavy engineering, structural forming, agricultural machinery components and large repair or fabrication operations where a standard mechanical press is not appropriate.
A Dnepropress inspection must focus on the hydraulic system as much as the frame. Cylinders, seals, pumps, valves, guide condition, electrical controls and foundation requirements determine whether the machine can be moved and recommissioned economically. TRIGA documents each candidate machine at the source location before removal planning.
Model Series
| Model | Nominal Force | Type | Application | Availability |
|---|---|---|---|---|
| D2243 | 2000 t | Hydraulic press | Stroke 1400 mm · Table 1650 x 2000 mm · 144.5 t weight | — Sold |
What to Check When Buying a Used Dnepropress Press
Cylinders and seals
Inspect the main cylinders for scoring, corrosion and oil leakage. Seal condition determines whether the press can hold pressure and whether recommissioning will require cylinder removal.
Pump group and valves
Check pumps, motors, manifolds, pressure valves and filtration. A heavy hydraulic press can look complete while still needing significant hydraulic overhaul before production use.
Guides and slide alignment
Measure guide clearance and look for uneven wear on the slide and columns. Poor alignment causes side load on cylinders and shortens seal and guide life.
Electrical system and controls
Verify motor power, control cabinet condition, pressure control, limit switches and safety interlocks. Older relay systems may need adaptation during installation.
Foundation and installation
Review foundation drawings, anchor points, overall height and lifting plan before purchase. A 144.5 ton hydraulic press requires serious civil and rigging preparation at both pickup and destination sites.
FAQ
Frequently Asked Questions
Dnepropress hydraulic presses are used for deep drawing, forming, straightening, pressing and heavy repair work on large parts. The D2243 size class suits heavy engineering, structural components, agricultural machinery and large fabrication shops.
The recent TRIGA Dnepropress D2243 reference press has been sold. We can source Dnepropress hydraulic presses through our partner network on request when a buyer sends force, stroke, table size, daylight and destination requirements.
TRIGA sells machines as found. We do not supply spare parts. Parts sourcing is the buyer's responsibility. Hydraulic seals, pumps, valves and electrical components may be sourced commercially; large castings and cylinders require specialist repair or manufacture to drawing.
Yes. TRIGA can organise dismantling and loading at the source location. If the buyer prefers to arrange their own crew, we coordinate access and timing with the seller.
Yes. We arrange shipping to any destination - Europe, Asia, India, the Middle East. Road transport goes with CMR documentation; for intercontinental shipments we handle Bill of Lading and export paperwork. All logistics are covered under the sale contract.
Contact Us
Looking for a specific machine?
Send us your specifications and we will advise on availability, inspection options and delivery.
Email
info@trigapl.com
Phone / WhatsApp
+39 331 780 4001
WhatsApp
+48 570 337 352
✓ Response within 24 hours · EN / IT / PL